Floor glider with dimensions 50 × 26 mm for square or rectangular tube frames and other surfaces.
Equipped with 100% scratch-free dry-walk carpet
At least 2 years of optimal floor protection
-
Floor type : all hard floors (wood, PVC, vinyl, residential concrete, concrete ciré, cast floors, etc.)
-
Material : plastic with sturdy dry-walk carpet.
-
Fixing : one-time mounting of the base part by screwing to wood/plastic, gluing and/or screwing to metal. Make sure that the metal surface is always well degreased with an alcohol wipe when gluing the Multifixx .
-
Sliding surface size : 50x26 mm. Is the surface narrower than 26 mm? Then use the Minifixx .
-
Furniture height : the furniture will be a maximum of 11 mm higher.
The base part is provided with an adhesive strip and two self-drilling screws are included.
The adhesive strip can only be used on steel and metal (degrease well). On all other surfaces the base part must be screwed.
Please note: the protective feet require maintenance .
Assembly
-
Clean and degrease the surface to be covered, for example with an alcohol wipe . If the surface to be covered is made of plastic (PP or PE), a primer for PP/PE must be applied beforehand!
- Remove the protective film and stick the base part firmly to the surface. For wood and plastic, this step prevents the base part from shifting until it is screwed in place.
- If necessary, pre-drill a 3 mm diameter hole through the screw holes of the base part using a drill. (Optional for metal surfaces)
- Carefully tighten the 2 screws provided until the screw heads are fully recessed into the base part. (Optional for metal surfaces)
- Click the protective foot onto the base part so that it is secured.
Watch video
