LTP Power Stripper 1LTR

How to Use

1. Prepare the Surface: Sweep or dry mop the area first to remove loose dirt, dust and grit.

2. Prepare the Solution: Dilute LTP Power Stripper according to the level of cleaning or stripping required.

3. Apply: Apply the prepared solution generously and evenly over the surface.

4. Allow to Work: Leave for approximately 5–10 minutes, ensuring the surface remains wet throughout the treatment.

5. Agitate: Agitate using a suitable cleaning pad, scrubbing brush or scrubbing machine where appropriate.

6. Remove & Rinse: Remove the dirty solution and rinse the surface thoroughly with clean water.

7. Allow to Dry: Allow the surface to dry completely before applying any further protective or finishing treatments.

Dilution

• General Surface Cleaning: Dilute approximately 1:12 with warm water
• Deep Stripping: Dilute approximately 1:6 with warm water
• Extremely Severe Contamination: Dilute approximately 1:4, including for oxidised linseed oil and other severe residues

Coverage

• Surface Cleaning: Approximately 60m² per litre
• Deep Stripping: Approximately 30m² per litre
• Extreme Cases: Approximately 15m² per litre

Important Information

• Always test on an inconspicuous area before full application
• Check surfaces are colourfast before general application
• Do not allow the cleaning solution to dry during treatment
• Severely contaminated surfaces may require a second treatment
• Rinse treated surfaces thoroughly with clean water after use
• Allow surfaces to dry completely before applying further treatments
• Store in a cool, dry and frost-free place
• Shelf life up to 5 years

Product Information

• Brand: LTP
• Product: Power Stripper
• Size: 1 Litre
• Type: Intensive Cleaner & Stripper
• Application: Interior & Exterior
• Product Code: LTP/16/1
• EAN: 5031220016019