LTP Porcelain Tile Protector LTR

How to Use

1. Prepare the Surface: Ensure the porcelain surface is completely clean and dry before application.

2. Shake Well: Shake the product thoroughly before use.

3. Apply the First Coat: Apply evenly using a broad paint brush, foam roller or low-pressure sprayer.

4. Apply the Second Coat: Apply a second coat after approximately 30 minutes.

5. Allow to Cure: Allow the treatment to cure for at least 1 hour before grouting or pointing.

6. Exterior Surfaces: Once the grout or jointing compound has dried and all residues have been removed, a further coat can be applied to exterior surfaces to provide additional protection against staining from organic matter.

Coverage

Approximately 30m² per litre on lower-porosity surfaces. Actual coverage will depend on the texture, porosity and condition of the surface.

Important Information

• Always test on an inconspicuous area before full application
• Do not apply below 5°C or above 25°C
• Ensure surfaces are completely clean and dry before treatment
• Allow at least 1 hour before grouting or pointing
• Clean application tools with water after use

Product Information

• Brand: LTP
• Product: Porcelain Tile Protector
• Size: 1 Litre
• Type: Water-Based Pre-Grout Porcelain Protector
• Finish: Invisible / Non-Film-Forming
• Application: Interior & Exterior
• Coverage: Approximately 30m² per Litre on Lower-Porosity Surfaces
• Product Code: LTP/39/1
• EAN: 5031220039018