LTP MPG Polished Porcelain Sealer 1 LTR

How to Use

1. Prepare the Surface: Ensure the surface is completely clean and dry. Any factory-applied wax or existing sealer should be removed before treatment.

2. Apply: Apply a thin, even coat using a soft cloth, sealant applicator pad or sponge.

3. Buff: Within approximately 20 minutes, while the sealer is still wet, buff the surface thoroughly using a clean, dry cloth or suitable buffing machine.

4. Allow to Dry: Allow approximately 4 hours for the treatment to dry. More porous surfaces may require a second coat.

5. Allow to Cure: Treated surfaces can normally be walked on after approximately 4 hours but require around 3 days to become fully resistant.

Coverage

Approximately 10–30m² per litre, depending on the porosity and condition of the surface.

Drying & Curing

• Buffing: Within approximately 20 minutes while the sealer is still wet
• Drying Time: Approximately 4 hours
• Foot Traffic: Normally after approximately 4 hours
• Full Resistance: Approximately 3 days
• Additional Coats: More porous surfaces may require a second coat

Important Information

• Always test on an inconspicuous area before full application
• Remove all excess sealer before it dries
• Do not apply above 25°C
• Switch off underfloor heating before application
• Avoid over-application as this can leave a greasy residue
• Allow approximately 3 days for full resistance

Product Information

• Brand: LTP
• Product: MPG Sealer
• Size: 1 Litre
• Type: Colourless Impregnating Sealer
• Finish: Natural Polished Finish
• Application: Interior & Exterior
• Coverage: Approximately 10–30m² per Litre
• Product Code: LTP/21/1
• EAN: 5031220021013