LTP Mattstone 1 LTR

How to Use

1. Prepare the Surface: Ensure the surface is completely clean and dry before application.

2. Apply: Apply the sealer evenly using a soft cloth, brush or sealant applicator pad.

3. Additional Coats: Allow at least 2 hours between coats. More absorbent surfaces may require additional coats to achieve suitable protection.

4. Remove Excess: After approximately 1 hour, buff the surface with a clean, lint-free cloth to remove excess sealer and achieve an even finish.

5. Allow to Cure: The product dries after approximately 2 hours but requires around 3 days to become fully resistant. Keep treated surfaces dry throughout this period.

Coverage

Coverage varies depending on the porosity and absorbency of the surface.

• Lower Porosity Surfaces: Approximately 1–2 litres per 10m²
• Higher Porosity Surfaces: Approximately 3–4 litres per 10m²

Drying & Curing

• Buff Excess: After approximately 1 hour
• Between Coats: At least 2 hours
• Drying Time: Approximately 2 hours
• Full Resistance: Approximately 3 days
• Application Temperature: 5°C–25°C

Important Information

• Always test on an inconspicuous area before full application
• Do not over-apply
• Do not apply in direct sunlight
• Apply between 5°C and 25°C
• Keep treated surfaces dry for at least 3 days after application
• Use only in well-ventilated areas
• Oil and grease spills should still be wiped up promptly

Product Information

• Brand: LTP
• Product: Mattstone
• Size: 1 Litre
• Type: Natural Matt Impregnating Sealer
• Finish: Natural Matt
• Protection: Water, Oil, Grease & Staining
• Application: Interior & Exterior
• Product Code: LTP/12/1
• EAN: 5031220012011