LTP Ironwax Satin 1LTR

How to Use

1. Prepare the Surface: Ensure the surface is completely clean and has been allowed to dry for at least 24 hours before application.

2. Do Not Shake: Do not shake the bottle before use.

3. Apply: Apply a thin, even coat using a sponge, brush, lint-free cloth or sealant applicator depending on the texture of the surface.

4. Additional Coats: Allow approximately 1 hour between coats. Around 3 thin coats are normally required.

5. Higher Sheen: Further coats can be applied where a higher sheen is required, up to a maximum of 6 coats.

6. Allow to Cure: Allow approximately 3 days for the treatment to reach full hardness and water resistance.

Coverage

Approximately 15–30m² per litre per coat, depending on the porosity and condition of the surface.

Drying & Curing

• Between Coats: Approximately 1 hour
• Typical Application: Around 3 thin coats
• Maximum: Up to 6 coats for a higher sheen
• Full Hardness & Water Resistance: Approximately 3 days

Important Information

• For interior use only
• Not suitable for wet rooms or shower enclosures
• Do not over-apply
• Do not shake before use
• Not recommended for highly vitrified quarry tiles or ceramics
• Avoid strong detergents on treated surfaces
• Always test on an inconspicuous area before full application
• Highly porous floors may require LTP Mattstone H2O before application

Product Information

• Brand: LTP
• Product: Ironwax Satin
• Size: 1 Litre
• Type: Satin Finish Surface Sealer
• Finish: Satin
• Application: Interior
• Coverage: Approximately 15–30m² per Litre per Coat
• Product Code: LTP/14/1
• EAN: 5031220014015