LTP Grout Stain Remover

How to Use

1. Test the Surface: Always test on an inconspicuous area before full application to confirm the surface is acid-resistant and suitable for treatment.

2. Mild Staining: Dilute 1 part product with 4 parts warm water. Apply using a cloth or sponge, then rinse thoroughly with clean water.

3. Heavier Staining: Dilute 1:1 with warm water. Apply generously and agitate with a scrubbing brush if required. Leave for approximately 5–10 minutes, keeping the surface wet throughout treatment.

4. Extremely Severe Deposits: The product can be used undiluted. Agitate where necessary to help loosen stubborn residues.

5. Rinse Thoroughly: After treatment, rinse the surface thoroughly with plenty of clean water to remove the cleaning solution and loosened residues.

Dilution

• Mild Staining: 1:4 with warm water
• Heavier Staining: 1:1 with warm water
• Extremely Severe Deposits: Use undiluted

Coverage

Approximately 5–25m² per litre, depending on the severity of staining, surface condition and dilution used.

Important Information

• Always test on an inconspicuous area before full application
• Contains hydrochloric acid
• Not suitable for marble, travertine or limestone
• Do not use on acid-sensitive surfaces
• Not suitable for stainless steel, chrome or enamel
• Take care when treating sandstone containing iron
• Do not use while underfloor heating is operating
• Avoid prolonged contact with grout joints
• Rinse treated surfaces thoroughly with clean water after use

Product Information

• Brand: LTP
• Product: Grout Stain Remover
• Size: 1 Litre
• Type: Cement, Limescale & Grout Residue Remover
• Application: Interior & Exterior
• Coverage: Approximately 5–25m² per Litre
• Product Code: LTP/8/1
• EAN: 5031220008014