LTP Blackstone Sealer & Restorer 250ml

How to Use

1. Prepare the Surface: Ensure the surface is completely clean and dry before application.

2. Shake Well: Shake the product thoroughly before use.

3. Apply: Apply evenly using a cloth, sealant applicator, foam roller or brush. Allow the treatment to absorb and dry.

4. Additional Coats: Further coats can be applied at approximately 2-hour intervals, up to a maximum of 3 coats.

5. Allow to Cure: Do not walk on the treated surface for at least 4 hours after the final application. Allow approximately 24 hours for the treatment to cure.

Coverage

• Higher Porosity Surfaces: Approximately 2m² per 250ml
• Lower Porosity Surfaces: Approximately 3.75m² per 250ml
• Polished Surfaces: Up to approximately 7.5m² per 250ml

Drying & Curing

• Between Coats: Approximately 2 hours
• Maximum Coats: Up to 3 coats
• Foot Traffic: Keep off the treated surface for at least 4 hours after the final application
• Curing Time: Approximately 24 hours

Important Information

• This is a permanent staining treatment that will darken both stone and grout
• Always test on an inconspicuous area before full application
• Ensure the surface is completely clean and dry before treatment
• Do not walk on the treated surface for at least 4 hours after the final application
• Allow approximately 24 hours for the treatment to cure

Product Information

• Brand: LTP
• Product: Blackstone Sealer & Restorer
• Size: 250ml
• Type: Water-Based Black Impregnating Sealer & Restorer
• Application: Exterior Stone Surfaces
• Product Code: LTP/37/.25
• EAN: 5031220037250