LTP Blackstone Sealer & Restorer 1Ltr

How to Use

1. Prepare the Surface: Ensure the surface is completely clean and dry before application.

2. Shake Well: Shake the product thoroughly before use.

3. Apply: Apply evenly using a sealant applicator, foam roller or paint brush and allow the treatment to penetrate the surface.

4. Build the Colour: Apply additional treatment where required to achieve the desired depth of colour.

5. Remove Excess: Remove any visible excess product using a clean, dry cloth.

6. Allow to Cure: Do not walk on the treated surface for at least 4 hours. Allow approximately 24 hours for the treatment to cure.

Coverage

• Higher Porosity Surfaces: Approximately 7.5m²/L
• Lower Porosity Surfaces: Approximately 15m²/L
• Polished Surfaces: Up to approximately 30m²/L

Important Information

• This is a permanent staining treatment that darkens both stone and grout
• Always test on an inconspicuous area before full application
• Ensure the surface is completely clean and dry before treatment
• Remove any visible excess product after application
• Do not walk on the treated surface for at least 4 hours
• Allow approximately 24 hours for the treatment to cure

Product Information

• Brand: LTP
• Product: Blackstone Sealer & Restorer
• Size: 1 Litre
• Type: Black Impregnating Sealer & Restorer
• Base: Water-Based
• Application: Exterior Stone Restoration & Protection
• Product Code: LTP/37/1
• EAN: 5031220037014