Lithofin MN Stain-Stop 1Ltr

How to Use

1. Prepare the Surface: Ensure the surface is clean, absorbent and completely dry before application.

2. Apply: Apply Lithofin MN Stain-Stop evenly and generously using a cloth, brush or suitable applicator.

3. Allow to Penetrate: Leave the product to penetrate for approximately 15 minutes, redistributing any excess where necessary.

4. Remove Excess: Do not allow excess product to dry on the surface. Remove all remaining residue within approximately 30 minutes using a clean, dry cloth.

5. Allow to Dry: The treated surface can be carefully walked on after approximately 2 hours. Allow approximately 24 hours for drying and approximately 5 days for full protective effectiveness.

Dilution

Ready to use. Apply undiluted and do not dilute before application.

Coverage

• Polished Stone: Approximately 12–15m² per litre
• Dense Stone: Up to approximately 40m² per litre
• Rough Granite: Approximately 5–7m² per litre
• Porous Sandstone: Approximately 3–6m² per litre
• Actual coverage will vary depending on the type, porosity and absorbency of the surface

Drying & Curing

• Careful Foot Traffic: After approximately 2 hours
• Dry: After approximately 24 hours
• Full Protective Effect: After approximately 5 days

Important Information

• Always test on a small, inconspicuous area before general application
• Non-absorbent or damp surfaces cannot be impregnated
• Do not allow excess product to dry on the surface
• Remove all remaining residue within approximately 30 minutes
• Protect glass, ceramics, wood and solvent-sensitive surfaces from splashes
• Always follow the product label and Lithofin technical instructions before use

Product Information

• Brand: Lithofin
• Product: MN Stain-Stop
• Available Sizes: 1 Litre & 5 Litres
• Type: Impregnating Stone Stain Protector
• Formula: Solvent-Based
• Finish: Natural Appearance
• Application: Interior & Exterior
• Dilution: Ready to Use / Undiluted
• Product Code: 166