Lithofin MN Power-Clean is a highly effective concentrated cleaner specially formulated for the thorough cleaning of marble, natural stone, cast stone and engineered stone surfaces.
Its mildly alkaline, low-odour formulation combines powerful cleaning and dissolving components to remove construction dirt, general and ingrained dirt, oil, grease, yellowed care-product residues, self-gloss films and light wax films.
Suitable for intensive deep cleaning, final cleaning of newly installed stone and the regular cleaning of heavily used surfaces, Lithofin MN Power-Clean can be used both indoors and outdoors. Its acid-free alkaline formulation makes it particularly useful for marble and limestone surfaces where acidic cleaners may be unsuitable.
Key Features
- Powerful concentrated stone cleaner
- Mildly alkaline, acid-free formulation
- Highly effective and economical
- Low odour
- Removes oil, grease and stubborn general dirt
- Removes ingrained contamination and construction dirt
- Removes yellowed care-product residues
- Removes self-gloss films
- Helps remove light wax films
- Suitable for final cleaning after installation
- Suitable for heavily used surfaces
- Suitable for interior and exterior use
- Professional 5 litre canister
Suitable For
- Marble – polished, honed and rough
- Limestone
- Granite
- Travertine
- Natural stone
- Cast and artificial stone
- Engineered stone
- Quartz composite
- Polished and finely honed stone
- Rough stone surfaces
- High-traffic stone floors
- Newly installed stone surfaces
- Indoor and outdoor stone surfaces
How to Use
1. Prepare the Solution: Dilute Lithofin MN Power-Clean according to the degree of contamination. For heavier contamination, a stronger concentration or undiluted product can be used.
2. Apply: Apply the cleaning solution evenly using a scrubbing brush, mop or other suitable cleaning equipment.
3. Allow to Work: Leave the product to work for approximately 15 minutes.
4. Agitate: Scrub or agitate the surface during the contact time to loosen stubborn dirt and residues.
5. Keep Wet: Do not allow Lithofin MN Power-Clean to dry on the surface. If necessary, add a small amount of water and continue brushing.
6. Remove the Solution: Remove the dirty cleaning solution. On larger areas, a suitable rubber squeegee or wet vacuum can be used.
7. Rinse: Wash the treated surface thoroughly with clean water.
8. Repeat if Required: For particularly stubborn contamination, repeat the treatment using a stronger concentration if necessary.
Dilution
-
General / Intensive Cleaning: Dilute with water up to approximately 1:10 depending on contamination
-
Heavy or Stubborn Contamination: Use undiluted or dilute with water up to approximately 1:5
- Adjust the concentration according to the surface condition and degree of contamination
Coverage
-
Concentrated Application: Up to approximately 10m² per litre
-
Diluted Application: Over 30m² per litre
-
5 Litre Concentrated Coverage: Up to approximately 50m²
-
5 Litre Diluted Coverage: Over approximately 150m²
- Actual coverage depends on dilution, surface condition and degree of contamination
Technical Information
-
Density: Approximately 1.0g/cm³
-
pH Value: Approximately 10
-
Appearance: Yellowish Liquid
-
Odour: Low / Non-Specific
-
Water Solubility: Complete
-
Product Type: Mildly Alkaline Cleaning Concentrate
-
Application: Concentrated or Diluted
Important Information
- Always test on an inconspicuous area before full application
- Avoid contact with sensitive surfaces
- Protect fresh paintwork, wood, wallpaper and other sensitive materials
- Do not allow the cleaning solution to dry on the surface
- Rinse thoroughly with clean water after intensive cleaning
- For removing heavier wax layers, Lithofin recommends Lithofin WAX-OFF
- For cement residues and rust discolouration on acid-resistant granite and gneiss, Lithofin recommends Lithofin MN Builders' Clean
- Concentrated product may be corrosive to metals
- Concentrated product can cause serious eye damage
- Wear suitable eye and face protection
- Keep out of reach of children
- Always follow the current product label and safety information
Environmental Information
- Surfactants are biodegradable in accordance with Regulation (EC) No. 648/2004
- The polyethylene (PE) container is recyclable
- Rinsed containers can be disposed of through an appropriate recyclable-material collection system
- Dispose of product residues in accordance with the current product label and local regulations
Storage
- Store tightly closed
- Keep in a cool location
- Do not store above 25°C
-
Shelf Life: Approximately 3 years when correctly stored
Product Information
-
Brand: Lithofin
-
Product: MN Power-Clean
-
Size: 5 Litres
-
Packaging: Canister
-
Type: Intensive Natural & Engineered Stone Cleaner
-
Formula: Mildly Alkaline Concentrate
-
pH Value: Approximately 10
-
Dilution: Undiluted to Approximately 1:10
-
Working Time: Approximately 15 Minutes
-
Coverage Concentrated: Up to Approximately 10m²/L
-
Coverage Diluted: Over 30m²/L
-
Application: Interior & Exterior
-
Lithofin Article / Product Code: 160
-
EAN: 4001524016054
