Lithofin MN Outdoor Cleaner - 5 Ltr

How to Use

1. Test First: Always create a test area on an inconspicuous part of the surface before general application.

2. Apply: Apply Lithofin MN Outdoor Cleaner generously and evenly, undiluted, using a suitable garden sprayer or similar applicator.

3. Allow to Work: Leave the cleaner to work for approximately 2–10 hours depending on the severity of the contamination. Approximately 2 hours is recommended for normal contamination, with up to 10 hours for particularly stubborn deposits.

4. Agitate: Brush or agitate the treated surface where required to help loosen stubborn contamination.

5. Rinse: Rinse the treated area thoroughly with clean water.

6. Repeat if Required: Particularly heavy or stubborn contamination can be treated again if necessary.

7. Clean Equipment: Clean application equipment thoroughly with water immediately after use.

Dilution

Ready to use. Apply undiluted and do not dilute.

Application Conditions

• Application: Undiluted
• Recommended Surface Temperature: 10–25°C
• Do not apply to heated or hot surfaces
• Protect the treated area from rain for approximately 4 hours
• Always create a test area before treating the entire surface

Coverage

• Coverage: Approximately 5–10m² per litre
• 5 Litre Coverage: Approximately 25–50m²
• Recommended Application Quantity: Approximately 100ml/m²
• Actual coverage will depend on surface condition, porosity and level of contamination

Technical Information

• Density: Approximately 1.1g/cm³
• pH Value: Approximately 13 (concentrate)
• Appearance: Clear, Yellowish Liquid
• Odour: Slightly Pungent
• Water Solubility: Very Good
• Product Type: Chlorine-Based Outdoor Cleaner
• Application: Ready to Use / Undiluted

Further Treatment

After cleaning, Lithofin recommends treating the surface with Lithofin ALGEX after a few days and repeating the ALGEX treatment annually to help keep exterior surfaces clean and bright.

For additional protection, Lithofin Splash-Stop >W< can be used on suitable stone surfaces to make them water-repellent, helping to reduce the tendency for contamination and algae formation.

Important Information

• For outdoor use
• Always test on an inconspicuous area before full application
• Protect treated surfaces from rain for approximately 4 hours
• Protect textiles from splashes as the product can cause permanent staining
• Protect plants, metals, wood and other sensitive materials from contact
• Immediately rinse accidental splashes on plants, metals or wood with plenty of clean water
• Do not apply to heated surfaces
• Do not mix with other cleaning products
• Mixing with other products may release hazardous chlorine gas
• Contains active chlorine compounds
• Use biocides safely
• Wear appropriate protective equipment according to the product label and safety data sheet
• Keep out of reach of children
• Always read the label and product information before use

Environmental Information

• Surfactants are biodegradable in accordance with Regulation (EC) No. 648/2004
• The polyethylene (PE) container is recyclable
• Dispose of product and container in accordance with local and national regulations

Storage

• Store tightly closed and upright
• Keep cool and dark
• Do not store above 20°C
• Consume within approximately 6 months
• Keep in the original container

Product Information

• Brand: Lithofin
• Product: MN Outdoor Cleaner
• Size: 5 Litres
• Type: Outdoor Natural & Concrete Stone Cleaner
• Formula: Chlorine-Based
• pH Value: Approximately 13
• Application: Ready to Use / Undiluted
• Working Time: Approximately 2–10 Hours
• Coverage: Approximately 5–10m²/L
• Approximate 5L Coverage: 25–50m²
• Use: Exterior
• Lithofin Article / Product Code: 163
• EAN: 4001524016354