lithofin KF Tile Restorer 1Ltr

How to Use

1. Test: Always test Lithofin KF Tile Restorer on a small, inconspicuous area before treating the entire surface.

2. Prepare: Depending on the degree of soiling, use the product neat or dilute with water up to approximately 1:10.

3. Apply: Spread the cleaning solution evenly over the surface using a suitable brush, scrubbing pad or mop.

4. Allow to Work: Leave the product to work for approximately 10–20 minutes. Do not allow the cleaning solution to dry on the surface.

5. Agitate: Scrub or agitate the surface where necessary to help loosen stubborn deposits and accumulated residues.

6. Remove: Remove the dirty cleaning solution from the surface.

7. Rinse: Rinse thoroughly with clean water, then rinse or wipe again with fresh clean water to ensure remaining product and residues are completely removed.

Dilution

• Heavy Soiling: Use neat where required
• General Deep Cleaning: Dilute with water up to approximately 1:10 depending on the degree of contamination
• Always adjust the concentration according to the surface condition and level of soiling

Coverage

• Used Neat: Approx. 10–15m² per litre
• Used Diluted: Approx. 50–100m² per litre
• Actual coverage depends on the degree of contamination, dilution and surface condition

Technical Information

• Density: Approx. 1.1g/cm³
• pH Value: Greater than 12
• Appearance: Yellowish Liquid
• Odour: Pleasant
• Water Solubility: Complete
• Product Type: Strong Alkaline Cleaning Concentrate
• Formulation: Solvent-Free

Important Information

• Do not use on polished marble
• Do not use on surfaces sensitive to alkaline cleaners
• Always test on an inconspicuous area before full application
• Do not allow the cleaning solution to dry on the surface
• Rinse thoroughly with clean water after use
• Contains sodium hydroxide
• May be corrosive to metals
• Causes severe skin burns and eye damage
• Wear suitable protective gloves, protective clothing and eye/face protection
• Keep out of reach of children
• Keep in the original container
• Always follow the current product label and safety information

Storage

• Store closed in a cool, dry location
• Shelf Life: Up to approx. 5 years when correctly stored

Product Information

• Brand: Lithofin
• Product: KF Tile Restorer
• Size: 1 Litre
• Type: Victorian & Ceramic Tile Restorer / Deep Cleaner
• Formula: Strong Alkaline Concentrate
• Solvent-Free: Yes
• pH Value: Greater than 12
• Dilution: Neat to Approx. 1:10
• Contact Time: Approx. 10–20 Minutes
• Coverage Neat: Approx. 10–15m²/L
• Coverage Diluted: Approx. 50–100m²/L
• Lithofin Article / Product Code: 184
• UK 1L Product Code: VIC1
• EAN: 4001524018416