HG Tile Protector

Preparation

Ensure the floor is completely clean and free from grease and dust before application.

For newly laid floors, ensure the adhesive and grout are fully cured and dry before treatment. This normally requires approximately 4–6 weeks.

How to Use

1. Prepare: Do not shake HG Tile Protector before use.

2. Apply: Apply the product undiluted using a wax spreader or a lint-free cloth wrapped around a squeegee. On rough surfaces, a long-pile paint roller can be used.

3. Spread Evenly: Apply in straight lines and in one direction without using excessive pressure.

4. Allow to Dry: Leave the coating to dry for approximately 40 minutes.

5. Apply a Second Coat if Required: If a second coat is required, apply it in the opposite direction to the first coat.

Coverage

• Coverage: Approx. 40m² per litre per coat
• Actual coverage may vary depending on the surface and application method

Important Information

• Apply undiluted
• Do not shake the product before use
• The floor must be completely clean, grease-free and dust-free before application
• Newly laid floors should be allowed to cure and dry for approximately 4–6 weeks before treatment
• Allow approximately 40 minutes drying time before applying a second coat
• Apply a second coat in the opposite direction to the first where required
• Always follow the current product label and manufacturer's instructions before use

Product Information

• Brand: HG
• Product: Tile Protector
• HG Product Number: 14
• Size: 1 Litre
• Type: Protective Tile Coating
• Finish: Satin
• Application: Undiluted
• Coverage: Approx. 40m²/L per Coat
• Product Code: 110100106
• EAN: 8711577001780