HG Hygienic Whirlpool Bath Cleaner

How to Use

Whirlpools Without an Internal Cleaning System:

1. Fill the Bath: Fill the whirlpool bath with warm water to approximately 5cm above the highest water or air jet.

2. Add Cleaner: Add 50–75ml of HG Hygienic Whirlpool Bath Cleaner directly to the water.

3. Run the System: Activate the whirlpool system and allow it to operate for approximately 15 minutes.

4. Empty & Rinse: Empty the bath and rinse thoroughly with clean water.

Whirlpools With an Automatic or Semi-Automatic Cleaning System:

Fill the cleaning system with HG Hygienic Whirlpool Bath Cleaner and follow the whirlpool manufacturer's instructions for the cleaning cycle.

Dosage & Maintenance

• Dosage: 50–75ml per treatment for whirlpools without an internal cleaning system
• Cleaning Cycle: Approx. 15 minutes
• Recommended Frequency: Approximately every 2–3 weeks
• Cleaning frequency may vary depending on how frequently the whirlpool bath is used

Important Information

• For automatic or semi-automatic cleaning systems, always follow the whirlpool manufacturer's instructions
• Ensure the water is approximately 5cm above the highest water or air jet when using the manual cleaning method
• Rinse the bath thoroughly with clean water after treatment
• Regular cleaning approximately every 2–3 weeks is recommended depending on frequency of use
• Always follow the current product label and safety instructions before use

Product Information

• Brand: HG
• Product: Hygienic Whirlpool Bath Cleaner
• Size: 1 Litre
• Type: Whirlpool Bath System Cleaner
• Application: Internal Jets & Pipework
• Dosage: 50–75ml per Treatment
• Recommended Frequency: Every 2–3 Weeks
• Product Code: 448100106
• EAN: 8711577013325