Fila Stoneplus Colour Enhancing Stain Protector

How to Use

Ensure the surface is clean and completely dry before application.

Apply FILA STONEPLUS undiluted using a brush, sponge or suitable applicator. Work the product evenly into the surface using a sponge or cloth, allowing it to penetrate while removing any excess product.

For a stronger colour-enhancing effect, additional coats can be applied at approximately 8-hour intervals.

The treated floor is ready for use after approximately 8 hours.

For routine maintenance, clean using a suitable diluted FILA maintenance cleaner.

Dilution

FILA STONEPLUS is supplied ready to use and should not be diluted.

Coverage

• Polished Stone: Approx. 30–50m²/L
• Unpolished Stone: Approx. 15–25m²/L

Important Information

• Always test on a small, inconspicuous area first to assess the final colour-enhancing effect
• The colour-enhancing effect is permanent and cannot simply be reversed
• Does not protect marble or limestone against acid attack
• Do not apply outdoors if rain is forecast
• Exterior surfaces may require periodic retreatment
• Remove excess product during application and do not allow unwanted residue to remain on the surface
• Professional spray application requires appropriate PPE
• Always follow the product label and manufacturer's safety instructions before use

Product Information

• Brand: FILA
• Product: STONEPLUS
• Available Sizes: 375ml / 1 Litre / 5 Litres
• Type: Colour Enhancing Stain Protector
• Formula: Solvent-Based Impregnating Treatment
• Application: Ready to Use
• Finish: Colour Enhancing / Natural
• Use: Interior & Exterior