EcoProTec Joint Residue Remover - 1 Ltr

How to Use

1. Prepare the Surface: Ensure the surface is clean and dry before application. Shake the product well before use.

2. Test First: Always test on a small, inconspicuous area before general application.

3. Apply: Apply the product generously to the affected area.

4. Allow to Work: Leave for up to 30 minutes, ensuring the treated area remains wet during the treatment period.

5. Agitate: Scrub the surface using a stiff brush or nylon scrubbing pad. Add a small amount of water and scrub again to help loosen the residue.

6. Remove Residue: Remove the loosened material using a sponge or wet vacuum, then rinse the surface thoroughly with clean water. Repeat the treatment if necessary.

7. Final Clean: For final cleaning, use EcoProTec Intensive Cleaner diluted 1:5 with warm water, then rinse thoroughly.

Coverage

• Light Stripping: Approximately 8–10m²/L
• Deep Stripping: Approximately 5m²/L

Important Information

• Always test on an inconspicuous area before general application
• Do not apply during rain or frost
• Avoid application to excessively hot or cold surfaces
• Keep the treated area wet during the treatment period
• Wear suitable gloves and eye protection during use
• Rinse the surface thoroughly after treatment

Product Information

• Brand: EcoProTec
• Product: Joint Residue Remover
• Size: 1 Litre
• Type: Jointing Compound Residue Remover
• Suitable For: Natural Stone & Porcelain Paving
• Formulation: Low Odour / Non-Caustic