Dr Schutz Clean and Strip 5ltr

How to Use

1. Prepare the Floor: Remove loose dirt, dust and debris before application.

2. Dilute: Dilute Clean and Strip with water at approximately 1:5 to 1:10 depending on the level of soiling.

3. Apply: Apply the cleaning solution evenly across the floor.

4. Allow to Work: Leave the solution to work for approximately 10 minutes. Do not allow the cleaning solution to dry on the surface.

5. Agitate: Agitate or clean the surface as required to loosen stubborn dirt, residues and contamination.

6. Remove Residue: Thoroughly remove the dirty cleaning solution from the floor.

7. Rinse: Rinse thoroughly with clean water until all cleaner and loosened residue has been removed.

8. Allow to Dry: Allow the floor to dry completely before applying any subsequent care or protective treatment.

Dilution

• Recommended Dilution: Approximately 1:5 to 1:10 with water
• Adjust the dilution according to the level of soiling and contamination

Coverage

• Coverage: Approximately 30–50m² per litre
• 5 Litre Coverage: Approximately 150–250m²
• Actual coverage will vary depending on dilution, floor condition and application method

Important Information

• Always check compatibility before use on unfamiliar flooring
• Follow the recommended dilution according to the level of contamination
• Do not allow the cleaning solution to dry on the surface
• Thoroughly rinse the floor with clean water after intensive cleaning
• Allow the floor to dry completely before applying subsequent care or protective treatments
• Always follow the flooring manufacturer's maintenance recommendations where applicable
• Always follow Dr. Schutz application instructions and read the product label before use

Product Information

• Brand: Dr. Schutz
• Product: Clean and Strip
• Size: 5 Litres
• Type: Intensive Cleaner / Floor Stripper
• Dilution: Approximately 1:5 to 1:10 Depending on Soiling
• Coverage: Approximately 30–50m² per Litre
• Suitable For: Vinyl, Linoleum, Rubber & Resin Flooring
• Product Code: CLEANSTRIP5