Auto Extreme Vehicle Cleaning Clay Bar - 100g

How to Use

1. Wash the Vehicle: Wash and rinse the vehicle thoroughly before using the clay bar.

2. Lubricate the Surface: Working on small areas at a time, apply a suitable clay bar spray or quick detailer to lubricate the surface.

3. Prepare the Clay: Break off a small piece of the clay bar and work it into a round disc.

4. Treat the Surface: Gently rub the clay over the lubricated surface to remove stubborn contaminants. Do not apply excessive pressure.

5. Fold the Clay: Once the clay becomes loaded with contaminants, stretch and fold it into itself until a clean section is available.

6. Wipe Clean: After treatment, wipe the area with a soft, clean cloth and repeat the process on other contaminated areas as required.

7. Replace When Required: Continue using the clay until it begins to deteriorate or becomes completely contaminated.

Important Information

• Always wash and rinse the vehicle before using the clay bar
• Keep the surface properly lubricated with a suitable clay bar spray or quick detailer during use
• Do not exert excessive pressure on surfaces as this may cause lasting damage
• If the clay bar is dropped on the ground, discard it immediately as trapped dirt and grit could damage vehicle surfaces
• Replace the clay once it begins to deteriorate or becomes completely contaminated
• Use only as directed
• Keep out of reach of children

Product Information

• Brand: Auto Extreme
• Product: Vehicle Cleaning Clay Bar
• Weight: 100g
• Type: Vehicle Paintwork Decontamination Clay Bar
• Material: Non-Abrasive Clay
• Suitable For: Removing Contaminants from Vehicle Paintwork Prior to Polishing or Waxing
• Product Number: 1218