Osmo Tannin Spot Remover

How to Use

1. Prepare the Surface: Remove loose dirt and debris from the affected wood before application.

2. Apply: Spray Osmo Tannin Spot Remover evenly onto the affected area until it is completely covered.

3. Allow to React: Leave the product to work for approximately 30–45 minutes.

4. Wipe Clean: Wipe the treated area using a clean, lint-free cloth.

5. Repeat if Required: Repeat the treatment where necessary, then wipe the area clean with clear water.

6. Allow to Dry: Leave the wood to dry thoroughly for approximately 24–48 hours before applying a suitable Osmo maintenance oil or finish.

Dilution

Ready to use. Do not dilute.

Coverage

• Coverage: Approximately 10m² per litre with one application
• Actual coverage may vary depending on the severity of staining and condition of the wood

Important Information

• Ready to use – do not dilute
• Always test on an inconspicuous area first
• Some bleaching of the wood colour may occur
• Protect metal fittings and plants from direct contact
• Allow the wood to dry fully before applying a new finish
• Allow approximately 24–48 hours drying time before refinishing or re-oiling
• Store away from frost and temperatures above 30°C
• Always follow the current product label and Osmo application instructions before use

Product Information

• Brand: Osmo
• Product: Tannin Spot Remover
• Size: 250ml
• Colour: Clear
• Type: Tannin & Black Spot Remover
• Form: Ready-to-Use Spray
• Application: Interior & Exterior
• Coverage: Approximately 10m² per Litre
• Reaction Time: Approximately 30–45 Minutes
• Drying Before Refinishing: Approximately 24–48 Hours
• Product Code: 6602
• Article Number: 139 00 149
• EAN: 4006850175758