Lithofin MN Power-Clean 1 Ltr

Lithofin MN Power-Clean is a highly effective concentrated cleaner specially formulated for the thorough cleaning of marble, natural stone, concrete stone and engineered stone surfaces.

Its mildly alkaline, acid-free formulation combines powerful cleaning components to quickly dissolve and remove grease, oil, stubborn general dirt, ingrained contamination and residues from floor-care products.

Suitable for both intensive deep cleaning and regular cleaning of heavily used areas, Lithofin MN Power-Clean can also be used for the final cleaning of newly installed stone surfaces. Its acid-free formulation makes it particularly useful where an acidic cleaner would be unsuitable, including many marble and limestone surfaces.

Key Features

• Powerful concentrated stone cleaner

• Mildly alkaline formulation

• Acid-free

• Solvent-free

• Low odour

• Highly effective and economical

• Removes grease and oil

• Removes stubborn general dirt

• Removes ingrained contamination

• Helps remove floor polish residues

• Removes residues from floor-care products

• Suitable for initial cleaning of newly installed surfaces

• Suitable for deep cleaning existing stone

• Suitable for high-traffic areas

• Suitable for interior and exterior use

Suitable For

• Marble

• Polished marble

• Honed marble

• Limestone

• Granite

• Travertine

• Natural stone

• Concrete stone

• Cast stone

• Engineered stone

• Quartz composite

• Polished stone surfaces

• Finely honed stone

• Rough stone surfaces

• High-traffic stone floors

• Newly installed stone surfaces

Directions for Use

For normal cleaning, dilute Lithofin MN Power-Clean with water according to the degree of contamination.

For general cleaning, dilute up to approximately 1:10 with water and distribute evenly over the surface.

For stubborn or heavily ingrained contamination, use the product undiluted or dilute up to approximately 1:5.

Apply using a suitable brush, mop or cleaning equipment and distribute evenly across the surface.

Allow the cleaner to work for approximately 10–20 minutes.

Agitate or scrub the surface where necessary to loosen stubborn contamination.

Do not allow the cleaning solution to dry on the surface.

Remove the dirty cleaning solution and rinse the surface thoroughly with plenty of clean water.

If the result is not satisfactory, repeat the treatment using a stronger concentration, longer contact time or more vigorous agitation as appropriate.

Coverage

• Approx. 10–30m² per litre

• Actual coverage depends on surface condition, level of contamination and dilution

• Diluted applications will provide greater coverage than concentrated deep cleaning

Technical Information

• Density: Approx. 1.0g/cm³

• pH Value: Approx. 10

• Appearance: Clear Liquid

• Odour: Low / Pleasant

• Water Solubility: Complete

• Product Type: Alkaline Cleaning Concentrate

• Acid-Free: Yes

• Solvent-Free: Yes

Important Information

• Always test on an inconspicuous area before full application

• Avoid splashes on sensitive materials

• Protect wood from contact with the cleaner

• Protect painted and varnished surfaces

• Protect wallpaper and other sensitive materials

• Do not allow the cleaning solution to dry on the surface

• Rinse thoroughly with clean water after intensive cleaning

• Follow the current product label and safety information

• Wear suitable protective equipment as specified on the product label

• Keep out of reach of children

Storage

• Store tightly closed

• Keep in a cool location

• Shelf Life: Up to approx. 3 years when correctly stored

Product Information

• Brand: Lithofin

• Product: MN Power-Clean

• Size: 1 Litre

• Type: Intensive Natural & Engineered Stone Cleaner

• Formula: Mildly Alkaline Concentrate

• Acid-Free: Yes

• Solvent-Free: Yes

• pH Value: Approx. 10

• Dilution: Undiluted to Approx. 1:10

• Working Time: Approx. 10–20 Minutes

• Coverage: Approx. 10–30m²/L

• Application: Interior & Exterior

• Lithofin Article Number: 160

• 1L Product Code: 160-11

• EAN: 4001524016016