FILA DETERDEK PRO Professional End Of Work Residue Remover

How to Use

Wet the surface thoroughly with water before application.

Normal Post-Installation Cleaning: Dilute between 1:5 and 1:10 with water depending on the level of soiling. Apply to a few square metres at a time and leave to work for approximately 5 minutes.

Agitate using a large brush or suitable single-disc machine. Remove the dirty cleaning solution using a cloth or wet vacuum, then rinse thoroughly with plenty of clean water.

Grout Containing Additives: A stronger dilution of approximately 1:3 can be used where required.

Extraordinary Outdoor Maintenance: Dilute approximately 1:10 with water.

Dilution

• Normal Post-Installation Cleaning: 1:5 to 1:10
• Grout Containing Additives: Up to approximately 1:3
• Extraordinary Outdoor Maintenance: Approximately 1:10

Coverage

1 Litre

• Terracotta at 1:5: Approx. 10–20m²
• Porcelain Tiles at 1:5: Approx. 40m²
• Natural Stone at 1:5–1:10: Approx. 20–35m²

5 Litres

• Terracotta at 1:5: Approx. 50–100m²
• Porcelain Tiles at 1:5: Approx. 200m²
• Natural Stone at 1:5–1:10: Approx. 100–175m²

Important Information

• Always test on a small, inconspicuous area before general application
• Do not use on polished marble
• Do not use on acid-sensitive materials
• Take extra care when cleaning aluminium surfaces
• Apply only when the surface temperature is between 5–30°C
• Store between 5–30°C
• Rinse treated surfaces thoroughly with plenty of clean water after cleaning
• Always follow the product label and manufacturer's safety instructions before use

Product Information

• Brand: FILA
• Product: DETERDEK PRO
• Available Sizes: 1 Litre / 5 Litres
• Type: Professional Post-Installation Residue Remover
• Dilution: 1:5–1:10
• Heavy Grout Residue Dilution: Up to 1:3
• Application: Interior & Exterior