EcoProTec Blackstone Colour Restorer

How to Use

1. Test the Surface: Always carry out a test on a small, inconspicuous area before general application to confirm the final colour and appearance.

2. Shake Well: Shake the product thoroughly before use.

3. Apply: Apply evenly using a sealant applicator, foam roller, soft cloth or brush depending on the surface being treated.

4. Allow to Penetrate: Allow the product to penetrate the stone and remove any visible excess before it dries on the surface.

5. Build the Colour: Additional treatment can be applied where required to achieve the desired depth of colour.

6. Allow to Cure: Do not walk on the treated surface for at least 4 hours after the final application. Allow approximately 24 hours for the treatment to cure.

Important Information

• Always test on an inconspicuous area before full application
• This is a permanent staining treatment that darkens both stone and grout
• Remove excess product before it dries on the surface
• Ideal application temperature is approximately 5–25°C
• Protect surrounding surfaces from accidental contact
• Do not walk on the treated surface for at least 4 hours after final application
• Allow approximately 24 hours for the treatment to cure

Product Information

• Brand: EcoProTec
• Product: Black Stone Colour Restorer
• Available Sizes: 1 Litre / 5 Litres
• Type: Water-Based Impregnating Sealer
• Application: Exterior
• Finish: Colour Restoring / Darkening
• Application Temperature: Approximately 5–25°C
• Walk-On Time: At Least 4 Hours
• Curing Time: Approximately 24 Hours