Amtico International High Temperature Adhesive

A co-polymer emulsion adhesive having particularly high resistance to temperature variations. It is solvent free, protected against biodegradation and is suitable for use over normal underfloor heating installations. For securing Amtico tiles onto sound, smooth and dry surfaces of concrete, sand/cement screed, smoothing and underlayment's, plywood and many other substrates that have been suitably prepared.

Asphalt and waterproof membranes and non-absorbent surfaces such as granolithic, terrazzo and quarry tiles must be prepared using a minimum of 3mm of the appropriate smoothing underlayment.

Coverage

Approximately 4m2 per litre using An A2 trowel, depending on the condition and absorbency of the subfloor.

5 litres - up to 20m2

15 litres - up to 60m2

Precautions

• Underfloor heating must be switched off at least 48 hours before and 48 hours after installation. It must not be switched on during installation.
• Do not apply loads or move furniture on the floor covering until the adhesive has fully set.
• Tiles may be damp mopped 24 hours after installation.