Description
A professional grade, ultra durable, two-pack floor varnish for wood floors exposed to heavy foot traffic.
- A two-part, water-based floor lacquer for high foot traffic environments
- Ideal for commercial floors including offices, pubs, shops and community halls
- Extremely durable and hard wearing
- Allows full traffic within 12 hours
- Offers a clear, non-yellowing finish
- GreenGuard approved for low indoor emissions
- Low V.O.C
| Brand | Bona |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 10m² per litre |
| Drying time | 3 hrs |
| Size | 5L |
| MPN | WT155646001 |
| GTIN | 7312799215569 |
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times. To mix smaller quantities of lacquer and hardener, mix the required amounts using the Bona Traffic Mix Bottle. 1 litre of lacquer corresponds to one part hardener, 2 litres to two parts and so on.
Optimal application conditions are between 18-25°C and 30-60% relative air humidity. High or low temperatures and humidity may shorten or lengthen the drying time. Minimum temperature for use is 13°C.
Where a longer drying time is required due to high temperature and/or low humidity, Bona Retarder can be added to the varnish to increase the 'open time' of the product.
Mixing in the Hardener
- Add appropriate mix of hardener to the lacquer
- Shake immediately for a minimum of 1 minute
- Insert the enclosed filter ready for pouring
- The mixture of hardener and lacquer should be used directly or at least within 4 hours of mixing
Application Technique
- Apply the lacquer using a suitable Bona applicator, as seen above
- Apply with a smooth flowing action, avoiding build up
- Always maintain a "wet edge" to avoid any overlaps
- Allow 2 - 3 hours between sanding/denibbing or re-coating
- Slightly increase drying time after each coat
- Apply a further coat in the same manner
- If necessary, lightly sand or denib using a fine grade sandpaper before the final coat. This is needed if a previous coat has been allowed longer than 24 hours to dry
Take reasonable precautions with the finish during the first few days after application:
- Do not cover (use protective sheets) or lay carpets onto the treated area during the first 3 days following application
- Appropriate protective measures (i.e. felt pads) should be taken for table and chair legs or other objects which could mark the floor
- Immediately wipe up any water or other liquid spillages and take particular care with flower pots
Floors treated with Bona Traffic HD can be subjected to light foot traffic in 8 hours after final application and ready for full use in 12 hours. Allow at least 3 days for the product to fully cure before laying carpets, rugs and moving furniture.